表面处理
达克罗涂覆
专业设备卖场
模具
铆钉
垫圈,挡圈
展会信息

【收藏】2021版美标《IFI紧固件标准手册》(第11版)目录大全

发布时间:2021-12-22
点赞数:0
阅读量: 4485
  简介

  美国工业紧固件协会(Industrial Fastener Institute,简称IFI)宣布推出2021版《IFI紧固件标准手册》。《IFI紧固件标准手册》汇编了最常用的英制紧固件和非ISO公制紧固件标准。

  新版包含96个由 ASTM、ASME、SAE和IFI发布的独立标准规范,并且还包括自2018年版以来修订的36项标准,以及几项新标准。2021版《IFI紧固件标准手册》是美国工业紧固件协会出版的第11版标准书。此版本展现了自1941 年第一版出版以来,美国紧固件标准和实践持续发展的80年光辉历程。在此期间,该手册发行面覆盖全球主要的制造和建筑行业。《IFI紧固件标准手册》素有紧固件“圣经”的美誉,而2021版《标准手册》继续行使它的使命,为紧固件应用行业及其服务企业提供热忱服务。

  2021年版的标题与2018年版一样,不包含“英寸”一词,因为其中包含的许多共识标准已合并为“英寸/公制双标准”。这种合并是紧固件标准委员会、ASTM F16、ASME B18 和SAE 紧固件委员会为撤回多余的ASTM、ASME和SAE公制紧固件标准而采用ISO公制紧固件标准所做的更大努力的一部分。尽管标题中省略了“英制”一词,但这本书从根本上仍然是英制紧固件标准的综合参考来源。


  目录 TABLE OF CONTENTS


  THREADS

  ASME B1.1-2019 Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)

  ASME B1.2 1983 (R2017) Gages and Gaging for Unified Inch Screw Threads

  ASME B1.3-2007 (R2012) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M and MJ)

  IF1-301 2008 (R2013) Gage Calibration Requirements and Procedures for Thread Gages


  BOLTS, STUDS AND THREADED ROD

  DIMENSIONS


  ASME B18.2.1-2012 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws

  ASME B18.5-2012 (R2017) Round Head Bolts

  ASME B18.9-2012 (R2017) Plow Bolts

  ASME B18.10- 2006 (R2016) Track Bolts and Nuts

  ASME B18.31.2-2014 Continuous Thread Stud, Studs for Flange Bolting (Stud Bolt), and Double-End Studs (Inch Series)

  ASME B18.31.3-2014 Threaded Rods

  ASME B18.31.5-2011 (R2016) Bent Bolts (Inch Series)

  IFI -111-2014 Hex Flange Screws

  IFI-115-2014 Flange 12-Point Screws

  IFI-148-2002 (R2013) Threaded Projection Weld Studs

  IFl -199-2014 Tap Bolts (Inch Series)

  MATERIAL AND PHYSICAL

  SAEJ429-2014 Mechanical and Material Requirements for Externally Threaded Fasteners

  ASTMA193/A193M-20 Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

  ASTM A307-14e1 Carbon Steel Externally Threaded Standard Fasteners

  ASTM A320/A320M-18 Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

  ASTM A354-17e2 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

  ASTM A394-08 (R2015) Steel Transmission Tower Bolts, Zinc Coated and Bare

  ASTM A449-14 (R2020) Hex Cap Screw, Bolts and Studs, Steel, Heat Treated,120/105/90 ksi Minimum Tensile Strength, General Use

  ASTM A540/A540M-15 Alloy-Steel Bolting for Special Applications

  ASTM A962/A962M-19 Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

  ASTM A1082/A1082M-16 High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

  ASTM F468-16 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

  ASTM F593-17 Stainless Steel Bolts, Hex Cap Screws, and Studs

  ASTM F901-20 Aluminum Transmission Tower Bolts and Nuts

  ASTM F1554-18 Anchor Bolts, Steel, 36, 55 and 105-ksi Yield Strength


  SOCKETS

  DIMENSIONS


  ASME B18.3-2012 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

  MATERIAL AND PHYSICAL

  ASTM A574-17 Alloy Steel Socket-Head Cap Screws

  ASTM F835-20 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

  ASTM F837-20 Stainless Steel Socket Head Cap Screws

  ASTM F879-15 (R2020) Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

  ASTM F880-12 (R2017) Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

  ASTM F912-11(R2017) Alloy Steel Socket Set Screws


  STRUCTURAL FASTENERS

  DIMENSIONS


  ASME B18.2.6-2019 Fasteners for Use in Structural Applications

  MATERIAL AND PHYSICAL

  ASTM F959/F959M-17a Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series

  ASTM F3125-19e2 High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

  ASTM F3148-17a High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions


  NUTS

  DIMENSIONS


  ASME B18.2.2-2015 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

  ASME B18.6.9-2010 (R2017) Wing Nuts (Inch Series)

  ASME B18.16.4-2008 (R2013) Serrated Hex Flange Locknuts: 90,000 psi

  ASME B18.16.6-2017 Prevailing Torque Locknuts

  MATERIAL AND PHYSICAL

  SAE J995-2017 Mechanical and Material Requirements for Steel Nuts

  ASTM A194/A194M-20a Carbon Steel, Alloy Steel and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

  ASTM A563-15 Carbon and Alloy Steel Nuts

  ASTM F467-13 (R2018) Nonferrous Nuts for General Use

  ASTM F594-09 (R2020) Stainless Steel Nuts

  IFI-101 2002 (R2013) Torque-Tension Requirements for Prevailing-Torque Type Steel Hex and Hex Flange Nuts

  IFI-155 2005 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts

  IFI-160-2007 (R2013) Test Procedure for the Performance of Nuts with Pre-Applied Adhesive Coated Threads


  SCREWS

  ASME B18.6.1-1981 (R2016) Wood Screws

  ASME B18.6.2-1998 (R2010) Slotted Head Cap Screws

  ASME B18.6.3-2013 Machine Screws, Tapping Screws, and Metallic Drive Screws

  ASME B18.6.8-2010 (R2017) Thumb Screws and Wing Screws

  ASME B18.13-2017 Screw and Washer Assemblies –SEMS

  IFl-113-2015 Steel Self-Drilling Tapping Screws

  ASTM C954-18 Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

  ASTM C1002-18 Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

  ASTM C1513-18 Steel Tapping Screws for Cold-Formed Steel Framing Connections


  WASHERS

  ASME B18.21.1-2009 (R2016) Washers: Helical Spring-Lock, Tooth Lock and Plain Washers (Inch Series)

  ASTM F436/F436M-19 Hardened Steel Washers Inch and Metric Dimensions

  ASTM F2437/F2437M-17 Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs


  RIVETS

  ASME B18.1.1-1972 (R2016) Small Solid Rivets 7/16 In. Nominal Diameter and Smaller

  ASME B18.1.2-1972 (R2016) Large Rivets 1/2 In. Nominal Diameter and Larger

  ASME B18.7-2007 (R2017) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps

  IFI-110-2003 (R2013) Glossary of Terms Relating to Blind Rivets

  IFI-114-2015 Break Mandrel Blind Rivets

  IFl-116-2015 Multi-Grip Break Mandrel Blind Rivets

  IFl-117-2003 (R2013) Pull Through Mandrel Blind Rivets

  IFl-119-2003 (R2013) Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

  IFI-123-2003 (R2013) Drive Pin Blind Rivets

  lFI-126-2003 (R2013) Break Mandrel Closed End Blind Rivets

  IFl-130-2003 (R2013) Structural Splitting Self-Plugging Pull Mandrel Blind Rivets

  IFI-134-2015 Multi-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets

  IFl-135-2013 Mechanical Testing of Blind Rivets

  IFI-137-2003 (R2013) Inspection and Quality Assurance for General Purpose Blind Rivets


  PINS

  ASME B18.8.1-2014 Clevis Pins and Cotter Pins

  ASME B18.8.2-2000 (R2010) Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins

  FINISHES

  ASTM B695-04 (R2016) Coatings of Zinc Mechanically Deposited on Iron and Steel

  ASTM F1941/F1941M-16 Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

  ASTM F2329/F2329M-15 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

  ASTM F3393-20e1 Zinc-Flake Coating Systems for Fasteners

  QUALITY

  ASME B18.2.9-2010 (R2017) Straightness Gage and Gaging for Bolts and Screws

  ASME B18.18-2017 Quality Assurance for Fasteners

  ASTM A370-20 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

  ASTM F606/F606M-19 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

  ASTM F788-20 Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series

  ASTM F812-12 (R2017) Surface Discontinuities of Nuts, Inch and Metric Series

  ASTM F1470-19 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

  ASTM F2282-18 Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

  ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

  IF1-124-2002 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws

  IFI-125-2007 (R2013) Test Procedure for the Performance of Adhesive Coated Prevailing-Torque Screws

  IFI-143-2002 (R2013) Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners


  GRADE MARKINGS

  REFERENCES


  Standards References

  INDEXES

  Index by Designation

  Index by Keyword

  欲了解更多相关信息或购买标准书籍,可致电金蜘蛛紧固件网:020-38861363。

  (来源:金蜘蛛紧固件网)
点赞0
本期话题:标准,金蜘蛛
评论
验证码
业务联系/技术支持
公司名称:广东金蜘蛛电脑网络有限公司
联系电话:020-38861363 38861343
电子邮箱:info@jzzfastener.com
QQ:1767548327
公众号:
视频号:
抖音号:
法律声明: 本网站中的厂商资料,供货、需求、合作、企业新闻等信息由本网站的注册会员发布,其合法性和真实性由各个发布信息的注册会员负责。
经营许可证编号:粤B2-20210752号丨备案号:粤ICP备09029740号
粤公网安备 44011102001662号
技术支持:广东金蜘蛛电脑网络有限公司
Golden Spider Network Co., Ltd.