【收藏】《2008版IFI紧固件标准与技术通报补编》目录大全

《2008版IFI紧固件标准与技术通报补编》
Supplemental Book of IFI Fastener Standards and Technical Bulletins, 2008 Edition

简介：

该书包括新增31项美国标准（英制和公制）和16项技术通报共计305页，这些内容是第七版英制美标（2003年版）和第三版公制美标（1999年版）所没有的。

目录：

IFI-108 Grade And Source Identification Marking Of Prevailing - Torque Type Hex Nuts Inch And Metric

IFI-112 High Performance Thread Rolling Screws

IFI-113 Steel Self-Drilling Tapping Screws

IFI-120 Glossary of Terms Relating To Plastic Fasteners

IFI-125 Test Procedure For the Performance Of Adhesive Coated Prevailing-Torque Screws

IFI-131 Carbon Steel Wire For Blind Rivet Mandrels

IFI-132 Carbon Steel Wire For Blind Rivet Bodies

IFI-133 Aluminum Wire For Blind Rivet Mandrels And Bodies

IFI-136 Studs And Bent Bolts

IFI-139 Quality Assurance Requirements For Fastener Testing Laboratories

IFI-141 Manual Of Terminology And Abbreviations

IFI-144 Test Evaluation Procedures For Coating Qualification Intended For Use On High - Strength Structural Bolts

IFI-153 Stainless Steel Wire And Rods For Mechanical Fasteners

IFI-154 A Standard Test Procedure For Qualification Of Anti - Cross Threading Screws - Inch Series

IFI-155 Test Procedure For the Performance Of Nonmetallic Resistant Element Prevailing-Torque Nuts - Inch Series

IFI-160 Test Procedure For the Performance Of Nuts With Pre - Applied Adhesive Coated Threads - Inch Series

IFI-166 Inspection Procedure For Thread Nicks - Inch Series

IFI-167 Procedures Of A Fastener Quality Plan For Manufacture And Alteration

IFI-170 Accelerated Corrosion Test For Mechanical Fasteners

IFI-301 Gage Calibration Reqij1rements And Procedures For Thread Gages


IFI-503 Metric High Performance Thread Rolling Screws

IFI-504 Metric Self-Drilling Tapping Screws

IFI-524 Test Procedure For The Performance Of Metric Nonmetall1c Resistant Element Prevailing -Torque Screws

IFI-525 Test Procedure For The Performance Of Metric Adhesive Coated Prevailing -Torque Screws

IFI-545 Mechanical And Performance Requirements For Prevailing-Torque Type Steel Metric Hex Nuts And Flange Nuts

IFI-548 Metric Threaded Projection Weld Studs

IFI-554 A Standard Test Procedure For Qualification Of Anti-cross Threading Screws - Metric Series

IFI-555 Test Procedure For the Performance Of Nonmetallic Resistant Element Prevailing-Torque Nuts - Metric Series

IFI-560 Test Procedure For The Performance Of Nuts With Pre-Applied Adhesive Coated Threads - Metric Series

IFI-562 Acceptance Gaging For Fastener Drive Systems With Six Lobes

IFI-566 Inspection Procedure For Thread Nicks - Metric Series


Only The Go Size Is Different After Plating On External Inch Threads

Only The Go Size Is Different After Coating On External Metric Threads

How Many Turns Can A Screw Enter a not go Ring Gage?

When Two Approved Thread Gages Do Not Agree, Is The Thread Acceptable Or Not?

Beware! Long Thread Engagement Lengths Can Cause Binding

Coarse Threads Are Generally Better For Assembly

Advantages Of Limiting Core Hardness During The Heat Treatment Process

ASTM Publishes Electroplating Standards Specifically For Threaded Fasteners

Fasteners Are Not The Cause Of All Assembly Problems

Bad Bolts Are Not Smart Enough To Find The Same Location To Fail In Every Time

Gather Lots Of Samples And Information Before Trying To Solve Customer Complaints About Failed Parts

Galvanic Compatibility (Corrosion)

Fastener Tightening Can Be Determined By Several Methods

10 Of The Most Frequently Asked Questions About The Final FQA

Dip-Spin Finish Compatibility

Hydrogen Embrittlement Testing Is Critical For Some Hardened Fasteners

欢迎咨询

了解更多相关信息或购买标准书籍，可致电金蜘蛛传媒：020-38861363。

本文为金蜘蛛紧固件网原创文章，转载请注明来源。