Soft-tip Nose-point set screw

Standard types of set screws including the cylinder, the cone point, flat point, oval point, Knurling, the use of set screws is usually an important component in a part of, such as the pulley or gear to the shaft. As a result of the traditional set screws is all-in-one, and the head high hardness, long lead shaft, gear wear, etc., in view of the situation of foreign equipment vendors usually dog point, soft point set screws to obtain a relatively good results, the liner companies stop Hexagon head screws with a precise end-pressure, easy to install, and at competitive prices. Products in accordance with the ISO 9001 quality certification system. Because of its relatively low hardness of the head material, to products used to connect only when the moving block has a stop block on the protection components are widely used in foreign assembly closely. For example, copper stop block, aluminum blocks, plastic blocks, such as low hardness, the working frequency components. Product specifications: Body material: SCM435, SUS304, Nylon 66. Plunger head material: S45C, SUS440, SUJ2, ceramics, resin, polyacetal, copper. Thread Specifications: Metric: M4 * 0.4, M5 * 0.8, M6 * 1.0, M8 * 1.25, M10 * 1.5, M12 * 1.75, M16 * 2.0, M20 * 2.5 British 6-32, 6-40, 8-32, 8-36, 10-32,1 / 4-20, 5/16-18, 3/8-16, 1/2-13, 5/8- 11, 3/4-10, 1-8