公制美标最新第三版《Metric Fastener Standards 3rd Edition》目录

发布时间:2004-12-06
点赞数:0
阅读量: 33875

公制美标第三版

Metric Fastener Standards
Year Published: 1999
Edition: Third Edition

大十六开超过1,000

如欲了解更多相关信息或购买标准书籍,请联系金蜘蛛传媒客服,联系电话:020-38861363

壁纸下载:   800x600   1024x768

3rd EDITION

METRIC FASTENER STANDARDS

Section A SCREW THREADS

Section B MATERIALS, COATINGS AND FINISHES

Section C BOLTS, SCREWS AND STUDS

Section D NUTS

Section E LOCKING FASTENERS

Section F STRUCTURAL BOLTING

Section G SLOTTED AND RECESSED SCREWS

Section H SOCKET SCREWS

Section I RIVETS

Section J PINS AND WASHERS

Section K TECHNICAL DATA

Section L QUALITY ASSURANCE

Section A SCREW THREADS  
IFI Basics of Metric Screw Threads A-1
ANSI/ASME B1.7M Extract of Definitions A-11
ASME B1.13M Metric Screw Threads - M Profile A-20
ASME B1.3M Screw Thread Gaging Systems for Dimensional Acceptability of Metric Screw Threads A-46
ANSI/ASME B1.16M Gages and Gaging for Metric M Screw Threads A-55
Section B MATERIALS, COATINGS AND FINISHES  
IFI Selecting Fastener Materials B-1
IFI Bolt and Nut Compatibility B-30
IFI Corrosion B-34
IFI Platings and Coatings B-50
ASTM F568M Carbon and Alloy Steel Externally Threaded Metric Fasteners B-56
ASTM F563M Carbon and Alloy Steel Metric Nuts B-68
ASTM F738M Stainless Steel Metric Bolts, Screws, and Studs B-79
ASTM F836M Stainless Steel Metric Nuts B-91
ASTM F468M Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] B-99
ASTM F467M Nonferrous Nuts for General Use B-109
ASTM F788/F788M Surface Discontinuities of Bolts, Screws, and Studs B-115
ASTM F812/F812M Surface Discontinuities of Nuts B-123
ASTM F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric] B-130
ASTM F871M Electrodeposited Coatings on Metric Threaded Components B-114
ASTM B633 Electrodeposited Coatings of Zinc on Iron and Steel B-154
ASTM B766 Electrodeposited Coatings of Cadmium B-160
ASTM A153 Zinc Coating (Hot-Dip) on Iron and Steel Hardware B-171
ASTM B695 Coatings of Zinc Mechanically Deposited on Iron and Steel B-175
ASTM B696 Coatings of Cadmium Mechanically Deposited on Iron and Steel B-183
ASTM F1136 Chromium/Zinc Corrosion Protective Coatings for Fastener B-191
ASTM F1135 Cadmium or Zinc Chromate Organic Corrosion Protective Coatings for Fasteners B-194
ASTM F1137 Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners B-197
Section C BOLTS ,SCREWS AND STUDS  
ASME B18.2.3.1M Metric Hex Cap Screws C-1
ANSI B18.2.3.2M Metric Formed Hex Screws C-19
ANSI B18.2.3.3M Metric Heavy Hex Screws C-30
ASME B18.2.3.4M Metric Hex Flange Screws C-38
ANSI B18.2.3.5M Metric Hex Bolts C-52
ANSI B18.2.3.6M Metric Heavy Hex Bolts C-60
ANSI B18.2.3.8M Metric Hex Lag Screws C-66
ASME B18.2.3.9M Metric Heavy Hex Flange Screws C-71
ASME B18.2.3.10M Square Head Bolts [Metric Series] C-86
IFI-528 Metric Studs and Bent Bolts C-94
ASME B18.5.2.1M Metric Round Head Short Square Neck Bolts C-99
ANSI/ASME B18.5.2.2M Metric Round Head Square Neck Bolts C-107
IFI-544 Metric Round Head Ribbed Neck Bolts C-114
ASME B18.5.2.3M Round Head Square Neck Bolts With Large Head [Metric Series] C-119
ASME B18.2.7.1M Metric 12-Spline Flange Screws C-126
Section D NUTS  
IFI Commentary on Nuts D-1
ASME B18.2.4.1M Metric Hex Nuts, Style 1 D-3
ANSI B18.2.4.2M Metric Hex Nuts, Style 2 D-8
ANSI B18.2.4.3M Metric Slotted Hex Nuts D-13
ANSI B18.2.4.4M Metric Hex Flange Nuts D-19
ANSI B18.2.4.5M Metric Hex Jam Nuts D-24
ANSI B18.2.4.6M Metric Heavy Hex Nuts D-29
Section E  LOCKING FASTENERS  
IFI Introduction to Locking Fasteners E-1
IFI-524 Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws E-7
IFI-525 Test Procedure for the Performance of Metric Chemical Coated Prevailing-Torque Screws E-12
ASME B18.16.3M Dimensional Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts E-15
ANSI B18.16.1M Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts E-21
ANSI B18.16.2M Torque-Tension Test Requirements for  Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts E-30
IFI-543 Test for Evaluating the Torque-Tension Relationship on Both External and Internal Metric Threaded Fastener E-31
Section F STRUCTURAL BOLTING  
IFI Commentary on High-Strength Structural Bolting F-1
ANSI B18.2.3.7M Metric Heavy Hex Structural Bolts F-9
ASTM A325M High-Strength Bolts for Structural Steel Joints [Metric] F-16
ASTM A490M High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] F-21
ASTM F959M Compressible- Washer-Type Direct Tension Indicators for Use With Structural Fasteners[Metric] F-25
Section G SLOTTED AND RECESSED SCREWS  
IFI An Introduction to Small Screws G-1
ASME B18.6.7M Metric Machine Screws G-12
ASME B18.6.5M Metric Thread Forming and Thread Cutting Tapping Screws G-37
SAE J1237 Metric Thread Rolling Screws G-80
IFI Recommended Technique for Measuring Case Depth G-90
IFI-504 Metric Self-Drilling Tapping Screws G-92
ASME B18.13.1M Screws and Washer Assemblies - SEMS [Metric Series] G-102
Section H SOCKET SCREWS  
ASME/ANSI B18.3.1M Metric Socket Head Cap Screws H-1
ASME/ANSI B18.3.3M Metric Hexagon Socket Head Shoulder Screws H-18
ASME/ANSI B18.3.4M Metric Hexagon Socket Button Head Cap Screws H-28
ASME/ANSI B18.3.5M Metric Hexagon Socket Flat Countersunk Head Cap Screws H-35
ASME/ANSI B18.3.6M Metric Hexagon Set Screws H-45
ASME/ANSI B18.3.2M Metric Hexagon keys and Bits H-55
ASTM A574M Alloy Steel Socket Head Cap Screws [Metric] H-60
ASTM A912M Alloy Steel Socket Set Screws [Metric] H-67
ASTM A880M Stainless Steel Socket Set Screws [Metric] H-73
ASTM A879M Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] H-78
ASTM A835M Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] H-84
ASTM A837M Stainless Steel Socket Head Cap Screws [Metric] H-91
Section I BLIND RIVETS AND SMALL SOLID RIVETS  
IFI An Introduction to Rivets I-1
IFI-110/550 Glossary of Terms Related to Blind Rivets I-3
IFI-505 Metric Break Mandrel Blind Rivets I-8
IFI-509 Metric Break Mandrel Closed End Blind Rivets I-15
IFI-520 Metric Pull Through Mandrel Blind Rivets I-21
IFI-522 Mechanical Testing of Metric Blind Rivets I-27
IFI-530 Metric Structural Splitting Self-Plugging Pull Mandrel Blind Rivets I-32
IFI-551 Metric Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets I-38
IFI-552 Metric Multi-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets I-46
IFI-553 Metric Drive Pin Blind Rivets I-51
ANSI/ASME B18.1.3M Metric Small Solid Rivets I-57
ANSI/ASME B18.7.1M Metric General Purpose Semi-Tubular Rivets I-68
Section J PINS AND WASHERS  
IFI An Introduction to Pins and Washers J-1
ASME B18.8.3M Metric Spring Pins, Coiled J-2
ASME B18.8.4M Metric Spring Pins, Slotted J-8
ASME B18.8.5M Metric Machine Dowel Pins - Hardened Ground J-16
ASME B18.8.6M Metric Cotter Pins J-22
ASME B18.8.7M Metric Headless Clevis Pins J-26
ASME B18.8.8M Metric Headed Clevis Pins J-32
ANSI B18.22M Metric Plain Washers J-38
ASTM F436M Metric Hardened Steel Washers J-42
IFI-534 Metric Beveled Washers J-48
ASME B18.21.2M Metric Lock Washers J-49
Section K TECHNICAL DATA  
IFI Rules for the Use of SI Units Applicable to Metric Mechanical Fasteners K-1
IFI What is a Screw? What is a Bolt? K-5
IFI-527 Clearance Holes for Metric Threaded Fasteners K-7
ASME B18.6.5M Tapping Screw Approximate Hole Sizes K-9
IFI IFI Engineering Committee Recommended Hole Sizes - Metric Types D,F,G,T Tapping Screws K-16
IFI ISO System of Limits and Fits K-18
SAE J121M Decarburization in Hardened and Tempered Metric Threaded Fasteners K-22
IFI-142 Hydrogen Embrittlement Risk Management K-26
IFI Weights of Metric Fasteners K-32
IFI Fastener Terminology K-37
IFI Standards and Specifications K-41
IFI In-Process Sampling Frequency K-52
Section L QUALITY ASSURANCE  
IFI Introductory Notes L-1
ASME/ANSI B18.18.1M Inspection and Quality Assurance for General Purpose Fasteners L-5
ASME/ANSI B18.18.2M Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners L-10
ASME/ANSI B18.18.3M Inspection and Quality Assurance for Special Purpose Fasteners L-18
ASME/ANSI B18.18.4M Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications L-31
ASME B18.18.5M Inspection and Quality Assurance Plan Requiring In-Process Inspection and Controls L-39
ASME B18.18.6M Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System L-50
ASME B18.18.7M Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan L-53
ASME FAP-1 Quality Assurance Program Requirements for Fastener Manufactures,Distributors,and Testing Laboratories L-55
ASTM F1470 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection L-82
     
点赞0
本期话题:金蜘蛛,资料
评论
全部评论
Tony  2005年8月20日 09:57
要好好看一下目录再说。
陆小姐  2005年10月5日 08:54
IFI标准都是中文版吗?多少钱?谢谢? 或请联系0519-6488200
zzx600551.sina.com  2006年2月27日 12:46
在那里能买到中文版本的此类标准书,外文版也行。
金蜘蛛  2006年2月27日 15:59
楼上朋友您好,金蜘蛛有售英文版,相关信息已发您邮箱中,或您可联系020-38861363
余先生  2006年4月17日 16:53
书多钱一本?急!!联系电话0755-86141615
网友  2006年7月26日 19:35
想问一下,有谁知道ANSI B18.6.7M是什么?
王先生  2006年7月28日 07:15
请问怎么买到?多少钱? wurthwf@126.com
金蜘蛛客服  2006年7月28日 10:11
楼上的“王先生”您好,我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
苦ネ  2006年10月31日 17:23
叫厨基 MickeyL@faithful.com.tw
wen  2007年3月29日 11:49
美国标准 IFI (ANSI, ASME, SAE)最新第七版(2003年出版) 公制美标最新第三版《Metric Fastener Standards 3rd Edition》 请报价 wen_liao@ap.irco.com ase333@sohu.com
徐先生  2007年5月15日 09:30
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的 报价发到我的邮箱里。 jxu@coldforge.com.au 谢谢。
金蜘蛛客服  2007年5月17日 09:14
楼上的"赖先生""wen""徐先生"您们好!我已经把标准书的报价发到您们的邮箱里了,请您们查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
Ms. C. Leung  2007年7月12日 15:43
1. Inch Fastener Standards, 7th Edition,IFI published in 2003 (English version) 2. Metric Fastener Standards, 3rd Edition, IFI published 1999 (English version) Please quote for both items & email to : kuromi_vs_melody@hotmail.com thanks!
金蜘蛛客服  2007年7月13日 09:14
楼上的"Ms. C. Leung"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
谢宵亮  2007年8月5日 09:27
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的 报价发到我的邮箱里。 tony@championfast.com TKS, 如果有类似紧固件标准的书,如德标方面的书,也请发一些目录和报价给我.
金蜘蛛客服  2007年8月8日 08:55
楼上的"谢宵亮"先生您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
杨先生  2007年8月11日 09:45
多少钱?价格请发至94536955@163.com
呼ね  2007年9月7日 09:46
叫рそ夹程穝材+ IFI 7th厨基祇筿秎 dan5951@hotmail.com
呼ね  2007年9月7日 09:47
叫厨基IFI 7th + Metric 3rd  dan5951@hotmail.com (芖)
呼ね  2007年9月7日 09:48
Please quote IFI 7th + Metric 3rd  dan5951@hotmail.com (Taiwan)
金蜘蛛客服  2007年9月10日 12:14
楼上的"呼ね"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
呼ね  2007年11月7日 17:00
眤, 叫拜Metric 3rd セ(笲)基?谅谅! sunchan@ms9.hinet.net
金蜘蛛客服  2007年11月8日 14:06
楼上的"呼ね"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
疭叭J  2007年11月25日 16:42
贺夹非и常稱潦禦,叫盢基戈㎝蹿よΑ祇и秎絚:jessie.tsay07@msa.hinet.net,獶盽稰谅! 1.紈夹 DIN (EN, ISO) 甅5セ璣ゅ) 2.夹 IFI (ANSI, ASME, SAE) 程穝材 3.穝糤そ夹程穝材
金蜘蛛客服  2007年11月26日 12:30
楼上的"疭叭J"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
yongwulin  2007年12月13日 15:01
请问ASTM A307A是国标那种啊?
金蜘蛛客服  2007年12月14日 12:19
楼上的"yongwulin"您好,你可以登陆金蜘蛛紧固件网的"咨询系统"把你的问题发布出来,向专家们请教的。这是咨询系统网址http://www.chinafastenerinfo.com/gb/am/index.aspx请你登陆.
林先生  2008年2月22日 11:41
Metric Fastener StandardsYear Published: 1999Edition: Third Editionmelvin198012@gmail.com
金蜘蛛客服  2008年2月22日 18:33
楼上的"林先生"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
郭先生  2009年3月3日 10:03
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的 报价发到我的邮箱里。 gcy@sohu.com 谢谢。
郭先生  2009年3月3日 10:04
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的 报价发到我的邮箱里。 gcy365@sohu.com 谢谢。
金蜘蛛客服  2009年3月3日 12:21
楼上的"郭先生"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
李先生  2010年3月26日 10:51
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的报价发到我的邮箱里,ths。 holdrich@ms38.hinet.net
李先生  2010年3月26日 14:35
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的报价发到我的邮箱里,tks。holdrich@ms38.hinet.net
金蜘蛛客服  2010年3月29日 09:55
楼上的"李先生"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
李先生  2010年3月29日 13:13
您好!沒有收到您的報價,是否能再mail一次? 謝謝~ holdrich@ms38.hinet.net
金蜘蛛客服  2010年3月30日 14:08
楼上的"李先生"您好!我已再次将标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
Kent  2010年8月17日 09:48
您好,可否能煩請將此標準寄送到我的信箱中 kent.hsu@jinshing.com.tw 必當感激不盡
金蜘蛛客服  2010年8月17日 11:17
楼上的"Kent"您好!我已经把标准书的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363
张先生  2012年3月20日 18:05
请把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的 报价发到我的邮箱里。 hsm1203@163.com 谢谢。
金蜘蛛客服  2012年3月21日 09:34
楼上的"张先生"您好!我已经把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363。
yuan  2012年9月17日 14:08
向您詢問IFI Metric Fastener Standards 3rd Edition英文版 1999出版,的價格,請將報價單e-mail至a10306@minhwei.com.tw
林先生  2015年3月13日 10:19
向您詢問IFI Metric Fastener Standards 3rd Edition英文版 1999出版的價格及相關緊固件方面的標準如DIN標準,請將報價單e-mail至 brian601113@gmail.com
金蜘蛛客服  2015年3月17日 10:17
楼上的"林先生"您好!我已经把公制美标最新第三版《Metric Fastener Standards 3rd Edition》英文版的报价发到您的邮箱里了,请您查看,如果需要购买,请致电金蜘蛛020-38861343,38861363。
业务联系/技术支持
公司名称:广东金蜘蛛电脑网络有限公司
联系电话:020-38861363 38861343
电子邮箱:info@jzzfastener.com
QQ:1767548327
公众号:
视频号:
抖音号:
法律声明: 本网站中的厂商资料,供货、需求、合作、企业新闻等信息由本网站的注册会员发布,其合法性和真实性由各个发布信息的注册会员负责。
经营许可证编号:粤B2-20210752号丨备案号:粤ICP备09029740号
粤公网安备 44011102001662号
技术支持:广东金蜘蛛电脑网络有限公司
Golden Spider Network Co., Ltd.