中文网English繁体版
苏州紧固件与技术展
金蜘蛛微信公众号 金蜘蛛公众号
浏览数:3325 推荐度:☆☆☆☆☆ 投票数:1评论数:0
【收藏】第十版美标(IFI, ASME, ASTM, SAE)目录大全(最新)

  核心提示:如需了解更多相关信息或购买标准书籍,可致电金蜘蛛传媒:020-38861363。

第十版美标(IFI, ASME,ASTM, SAE)目录大全(最新)

2018版《IFI紧固件标准手册》(第十版)
2018 Edition IFI Book of Fastener Standards
10th Edition
jzz
  简介:

  2018版《IFI紧固件标准手册》(第十版)汇编了最常用的英寸制紧固件标准和非ISO公制紧固件标准,由美国工业紧固件协会(IFI,Industrial Fastener Institute)出版。该书包含92个由ASTM、ASME、SAE和 IFI发布的标准尺寸。

  自1941年推出以来,《IFI紧固件标准手册》一直被视为“紧固件行业圣经”,对于各行各业的设计师、制造业工程师和经理,该手册都是一本不可或缺的使用指南。

  由于先前已经有第九版,因此第十版只收录了标准尺寸,更多的技术资料和注释需要另见《IFI 紧固件技术手册》。

目录:
TABLE OF CONTENTS

  THREADS

  ASME B1.1-2003 (R2008) Unified Inch Screw Threads (UN and UNR Thread Form)

  ASME B1.2 1983 (R2017) Gages and Gaging for Unified Inch Screw Threads

  ASME B1.3-2007 (R2017) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

  IFI-301 2008 (R2013) Gage Calibration Requirements and Procedures for Thread Gages

  BOLTS, STUDS AND THREADED ROD

  DIMENSIONS

  ASME B18.2.1-2012 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws

  ASME B18.5-2012 (R2017) Round Head Bolts (Inch Series)

  ASME B18.9-2012 (R2017) Plow Bolts

  ASME B18.10-2006 (R2016) Track Bolts and Nuts

  ASME B18.31.2-2014 Continuous Thread Studs, Studs for Flange Bolting (Stud Bolts) and Double-End Studs (Inch Series)

  ASME B18.31.3-2014 Threaded Rods (Inch Series)

  ASME B18.31.5-2011 (R2016) Bent Bolts (Inch Series)

  IFI-111-2014 Hex Flange Screws

  IFI-115-2014 Flange 12-Point Screws

  IFI-148-2002 (R2013) Threaded Projection Weld Studs

  IFI-199-2014 Tap Bolts (Inch Series)

  MATERIAL AND PHYSICAL

  SAE J429-2014 Mechanical and Material Requirements for Externally Threaded Fasteners

  ASTM A193/A193M-17 Alloy Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

  ASTM A307-14e1 Carbon Steel Bolts, Studs, and Threaded Rod 60,000 PSI Tensile Strength

  ASTM A320/A320M-17b Alloy-Steel and Stainless Steel Bolting Materials for Low Temperature Service

  ASTM A354-17e1 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

  ASTM A394-08 (R2015) Steel Transmission Tower Bolts, Zinc Coated and Bare

  ASTM A449-14 Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

  ASTM A962/A962M-17 Common Requirements For Bolting Intended For Use At Any Temperature From Cryogenic To The Creep Range

  ASTM F468-16 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

  ASTM F593-17 Stainless Steel Bolts, Hex Cap Screws, and Studs

  ASTM F901-01 (R2017) Aluminum Transmission Tower Bolts and Nuts

  ASTM F1554-17e1 Anchor Bolts, Steel, 36, 55 and 105-ksi Yield Strength

  SOCKETS

  DIMENSIONS


  ASME B18.3-2012 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

  MATERIAL AND PHYSICAL

  ASTM A574-17 Alloy Steel Socket Head Cap Screws

  ASTM F835-16 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

  ASTM F837-13e1 Stainless Steel Socket Head Cap Screws

  ASTM F879-15 Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

  ASTM F880-12 (R2017) Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

  ASTM F912-11 (R2017) Alloy Steel Socket Set Screws

  STRUCTURAL FASTENERS

  DIMENSIONS


  ASME B18.2.6-2010 Fasteners for Use in Structural Applications

  MATERIAL AND PHYSICAL

  ASTM F959/F959M-17 Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series

  ASTM F3125/F3125M-15a High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions

  ASTM F3148-17a High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions

  NUTS

  DIMENSIONS


  ASME B18.2.2-2015 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

  ASME B18.6.9-2010 (R2017) Wing Nuts (Inch Series)

  ASME B18.16.4-2008 (R2013) Serrated Hex Flange Locknuts: 90,000 psi (Inch Series)

  ASME B18.16.6-2017 Prevailing Torque Locknuts (Inch Series)

  MATERIAL AND PHYSICAL

  SAE J995-2017 Mechanical and Material Requirements for Steel Nuts

  ASTM A194/A194M-17a Carbon Steel, Alloy Steel and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

  ASTM A563-15 Carbon and Alloy Steel Nuts

  ASTM F467-13e2 Nonferrous Nuts for General Use

  ASTM F594-09 (R2015) Stainless Steel Nuts

  IFI-101 2002 (R2013) Torque-Tension Requirements for Prevailing-Torque Type Steel Hex and Hex Flange Nuts

  IFI-155 2005 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts (InchSeries)

  IFI-160-2007 (R2013) Test Procedure for the Performance of Nuts with Pre-Applied Adhesive Coated Threads (Inch Series)

  SCREWS

  ASME B18.6.1-1981 (R2016) Wood Screws (Inch Series)

  ASME B18.6.2-1998 (R2010) Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series)

  ASME B18.6.3-2013 Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)

  ASME B18.6.8-2010 (R2017) Thumb Screws and Wing Screws (Inch Series)

  ASME B18.13-2017 Screw and Washer Assemblies — SEMS (Inch Series)

  IFI-113-2015 Steel Self-Drilling Tapping Screws

  ASTM C954-15 Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

  ASTM C1002-16 Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

  ASTM C1513-13 Steel Tapping Screws for Cold-Formed Steel Framing Connections

  WASHERS

  ASME B18.21.1-2009 (R2016) Washers: Helical Spring-Lock, Tooth Lock and Plain Washers (Inch Series)

  ASTM F436/F436M-18 Hardened Steel Washers Inch and Metric Dimensions

  ASTM F2437/F2437M Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

  RIVETS

  ASME B18.1.1-1972 (R2016) Small Solid Rivets 7/16 In. Nominal Diameter and Smaller

  ASME B18.1.2-1972 (R2016) Large Rivets 1/2In. Nominal Diameter and Larger

  ASME B18.7-2007 (R2017) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and End Caps

  IFI-110-2003 (R2013) Glossary of Terms Relating to Blind Rivets

  IFI-114-2015 Break Mandrel Blind Rivets

  IFI-116-2015 Multi-Grip Break Mandrel Blind Rivets

  IFI-117-2003 (R2013) Pull Through Mandrel Blind Rivets

  IFI-119-2003 (R2013) Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

  IFI-123-2003 (R2013) Drive Pin Blind Rivets

  IFI-126-2003 (R2013) Break Mandrel Closed End Blind Rivets

  IFI-130-2003 (R2013) Structural Splitting Self-Plugging Pull Mandrel Blind Rivets

  IFI-134-2015 Structural Positive Locking, Self-Plugging Blind Rivets

  IFI-135-2013 Mechanical Testing of Blind Rivets

  IFI-137-2003 (R2013) Inspection and Quality Assurance for General Purpose Blind Rivets

  PINS

  ASME B18.8.1-2014 Clevis Pins and Cotter Pins (Inch Series)

  ASME B18.8.2:2000 (R2010) Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins (Inch Series)

  FINISHES

  ASTM B695-04 (R2016) Coatings of Zinc Mechanically Deposited on Iron and Steel

  ASTM F1941/F1941M-16 Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

  ASTM F2329/F2329M-15 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

  QUALITY

  ASME B18.2.9-2010 (R2017) Straightness Gage and Gaging for Bolts and Screws

  ASME B18.18-2017 Quality Assurance for Fasteners

  ASTM A370-17a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

  ASTM F606/F606M-16 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

  ASTM F788-13 Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

  ASTM F812-12 (R2017) Surface Discontinuities of Nuts, Inch and Metric Series

  ASTM F1470-18 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

  ASTM F2282-15 Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

  ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

  IFI-124-2002 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws

  IFI-125-2007 (R2013) Test Procedure for the Performance of Adhesive Coated Prevailing-Torque Screws

  IFI-143-2002 (R2013) Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners

  GRADE MARKINGS

  REFERENCES

  Standards Referenced

  INDEXES

  Index by Designation

  Index by Keyword

  欲了解更多相关信息或购买标准书籍,可致电金蜘蛛传媒:020-38861363。

  (本文为金蜘蛛紧固件网专稿,转载请注明来源。)

2019/11/12 10:17:00

金蜘蛛传媒微信公众号

分享到:
上一篇:市场监管总局抽查高强度紧固件 不合格发现率5.6%
下一篇:瑞典紧固件Bufab并购美国ABS

最新的相关信息:
永年标准件停工半月?有文件!——2020-10-21
小螺丝如何成就河北永年成为“中国紧固件之都”?答案在这里——2020-10-19
2020年度ISO/TC2国际紧固件标准化网络会议——2020-10-15
上海紧固件与技术展9月23日盛大开幕,商机涌动!——2020-09-24
标发委组织召开永年紧固件设备制造企业征求意见座谈会——2020-09-22
邯郸永年标准件创新驱动逆势向好——2020-09-03

本文涉及话题: 标准 金蜘蛛

编辑推荐:
jzz

第二十一届苏州紧固件与技术展(2021年10月27-29日,苏州国际博览中心)
jzz

宁波台达:拥抱变化,勇于创新,从容应对市场变局
jzz

“2020江苏省紧固件产业高质量发展大会”隆重举行

你对本文的评价如何?

☆☆☆☆☆(优秀)
☆☆☆☆(好)
☆☆☆(一般)
☆☆(较差)
☆(糟糕)

最新的业界信息
·匠心打造,工业盛宴︱一场蓄力已久的智能制造大秀即将开场!
·苏州反超上海成第一大工业城市,厉害之处在哪里?
·燃油导轨螺栓松动 大众在美国召回21.8万辆汽车
·2020年中国紧固件市场需求现状与前景分析 汽车紧固件市场空间大
·深圳市紧固件行业协会党支部组织开展专题党课学习活动
·2020年中国紧固件行业供需现状与贸易情况分析 行业总体向好发展
·中汽协:9月汽车商品进出口总额156.5亿美元
·日本北村精工推出No Break抗裂木螺絲
·“逆周期因子”功成身退 人民币仍有望温和升值
·工信部:1-8月机械工业增加值同比增长2.5%
最近热门
·“2020江苏省紧固件产业高质量发展大会暨泰州市高性能紧固件产业技术创新战略联盟成立大会”隆重举行
·2020年1-8月中国紧固件出口数量及出口金额统计
·阿根廷对华碳钢紧固件启动第二次反倾销日落复审立案调查
·永年标准件停工半月?有文件!
·统计局:前三季度全国固定资产投资同比增长0.8% 年内首次转正
·2020年1-8月机床工具行业运行概况
·中国汽车制造业工业增加值同比继续保持较快增长
·中国经济“三季报”:7个“转正”彰显强劲增长动力
·中国手机商向日企紧急增订零部件
·又一日本零部件厂商“翻车”!丰田、日产等车企或面临召回,均胜电子回应:日本之外工厂不存在类似情况

更多信息

台湾辉鋐工业股份有限公司


法律声明: 本网站中的厂商资料,供货,需求,合作等信息由本网站的注册会员发布,其合法性和真实性由各个发布信息的注册会员负责。

金蜘蛛紧固件公众号
金蜘蛛公众号
  
金蜘蛛紧固件网客服
金蜘蛛客服

经营许可证编号:粤B2-20050251号 备案号:粤ICP备09029740号
金蜘蛛紧固件网粤公安备案

粤公网安备 44011102001662号